As for wearing the procedure of existing splint, due to overlapping on ankle and elbow, it may lose its adherence and loses its strength. - HM SPLINT is made of unique cotton yarn with much flexibility so it can tightly adhere to the curved surface of the skin in complete oval shape maintaining its strength.
Prevention of wound
The traditional splint may cause wound due to the friction on overlapped points. - HM SPLINT has great flexibility on folded points so it maintains an oval shape causing no wound caused by friction. Traditional glass fiber splint can damage the skin of patients or medical staff as its cut edge is sharp. - Cross-section of HP SPLINT is soft so it never causes such a harm.
Convenience of wearing procedure
Traditional Splint requires expertise in wearing procedure. - HM SPLINT is much softer than glass fiber due to its outstanding formability and when fixed with compression bandage it is easy to fix, making the wearing procedure much easier.
|
HS Code |
Product Code |
Description |
General part of use |
|
9021.10 |
HMS330 |
HM Splint 3" X 30Cm |
short arm |
|
9021.10
|
HMS388 |
HM Splint 3" X 88Cm |
long leg |
|
9021.10
|
HMS438 |
HM Splint 4" X 38Cm |
short arm (adult) |
|
9021.10
|
HMS476 |
HM Splint 4" X 76Cm |
long leg (adult) |
|
9021.10
|
HMS576 |
HM Splint 5" X 76Cm |
short leg |
|
9021.10
|
HMS5114 |
HM Splint 5" X 114Cm |
long leg |
|
HS Code |
Product Code |
Description |
General part of use |
|
9021.10
|
HMS3450 |
HM Splint 3" X 450Cm |
Cut to match the size of the affected area before use. |
|
9021.10 |
HMS4450 |
HM Splint 4" X 450Cm |
Cut to match the size of the affected area before use. |
|
9021.10
|
HMS5450 |
HM Splint 5" X 450Cm |
Cut to match the size of the affected area before use. |
1. Wear regular exam gloves. Soak the released HM SPLINT in water for 5 ~ 7 sec. Water moderate temp. (20 ~ 25℃)
2. Lightly squeeze the HM SPLINT out of the water 2 ~ 3 times. (Using a dry towel to remove moisture is more effective.)
3. Put the splint pad on an affected area and roll bandage onto it.
4. Adjust positions where you want.
5. HM SPLINT procedure is complete. (The HM SPLINT gets solid and able to fix well after 10 ~ 15 minutes.)
1. Wear regular exam gloves. Soak the released HM SPLINT in water for 5 ~ 7 sec. Water moderate temp. (20 ~ 25℃) Lightly squeeze the HM SPLINT out of the water 2 ~ 3 times. Apply HM SPLINT to the affected area as shown in the picture.
2. Roll bandage onto the pad.
3. HM SPLINT procedure is complete. (The HM SPLINT gets solid and able to fix well after 10 ~ 15 minutes.)